Contact TechDocs
If you are not finding the results you need and still have questions, submit a request using the form below and our Tech Docs team will get right on it. Our goal is to provide the content you need!
CB10 FAQ
- FAQ | How long does it take for the CB10 battery to charge?
- FAQ | What is the performance run time of the CB10 on battery power?
- FAQ | How many charges can the CB10 battery handle before the battery health starts to degrade?
- FAQ | Can I turn off the low-power conservation mode so that my speaker can be left unattended for more than 30 minutes without needing a power cycle?
- FAQ | Can I control the settings of my CB10 loudspeaker remotely?
- FAQ | Can I adjust settings on the QSC Loudspeaker Control App for one channel, and physical settings on the back of the loudspeaker for another channel simultaneously?
- FAQ | If I have a channel set to CUSTOM (APP) on the back of the loudspeaker, but I don’t know where I set the gain to in the QSC Loudspeaker Control App, can I still control the gain from the back of the loudspeaker?
- FAQ | There is an ACOUSTIC GUITAR preset on CHANNEL B, but there is no HI-Z (high impedance) input. Will my acoustic guitar function properly when plugged into that line level input without a HI-Z circuit?
- FAQ | Can I connect different model QSC loudspeakers that have Bluetooth audio connectivity?
Popular Articles
- Error | Protect Mode 4 on K.2 Series loudspeakers
- Troubleshooting | K.2 Loudspeaker Does Not Pass Audio
- FAQ | What is linear phase and why should anyone care about it?
- Troubleshooting | K.2 Loudspeaker Does Not Turn On
- FAQ | What is the difference between the K12 and KW122 powered loudspeakers?
- Troubleshooting | TouchMix 8/16 will not turn on
- How To | Removal and Installation of K.2 Amp Module for Service
- Troubleshooting | K.2 Speaker Displaying Firmware 9.1.1.x
- FAQ | Can I use the Touchmix as an audio interface?