How To

How To & Use Case Guides

• How To | Using TouchMix 30 with conferencing software in Windows
• How To | Set up In Ear Monitors (IEM) with TouchMix mixers
• How To | Clean and disinfect a TouchMix LCD screen.
• How To | Reset the password on a TouchMix
• How To | Use iRig for TouchMix live streaming.
• How To | Find out why there so many audio files after importing audio files in to a DAW.
• How To | Ensure the files are aligned properly after importing audio files into DAW.
• How To | Use an outboard processor/fx unit with the TouchMix.
• How To | Setup the TouchMix TM-30 DAW Connection for MAC.
• How To | Download and Install TouchMix File.
• How To | Use the TouchMix User Buttons to clear all channels that are in the Cue mode.
• How To | Use the TouchMix User Buttons to set the Tap Tempo when using the Mon/Stereo Delay or the Stereo Delay.
• How To | Use the TouchMix User Buttons force highlighted Fader volume turn off.
• How To | Use the TouchMix User Buttons to force highlighted Fader or Knob to go "0"db (unity).
• How To | Use the TouchMix User Buttons to get directly to a specific mute group.
• How To | Use the TouchMix User Buttons to un-mute ALL channels.
• How To | Use the TouchMix User Buttons to clear all channels that have clipped (red line in the Navigation Strip).
• How To | Use the TouchMix User Buttons to get directly to a particular DCA fade. (i.e., drums, vocals, KB, etc.).
• How To | Use the TouchMix User Buttons to get to ALL (8) DCA faders.
• How To | Use the TouchMix User Buttons to get to the FX Wizard.
• How To | Use the TouchMix User Buttons to get to the FX Overview screen.
• How To | Use the TouchMix User Buttons to get to any Input Channel (4) Band Parametric EQ.
• How To | Use the TouchMix User Buttons to get to the Main or Aux 1/3 Octave Output EQ.
• How To | Use the TouchMix User Buttons to get to the output notch Filter/Anti Feedback screen.
• How To | Use a TouchMix User Button to get to any input Channel Directly. (i.e. “Get to the CEO’s Mic Immediately”).
• How To | Stop the transport with a User Button on the TouchMix.
• How To | Record/Stop the Transport with a User Button on TouchMix.
• How To | Play/Stop the Transport with a User Button on TouchMix.
• How To | Arm ALL tracks at once to record on TouchMix.
• How To | Connect TouchMix to an existing network in a facility.
• How To | Format LaCie 500GB hard drive for use with TouchMix mixer.
• How To | View MAC addresses with Wi-Fi dongle on TouchMix 8 or 16.
• How To | K.2 Firmware Installation > macOS
• How To | Store Hard Links from Q-SYS Designer.
• How To | Deploy a KW181 Sub in Ease Focus.
• How To | Run GX amp in parallel.
• How To | Change the PLD / CXD password from the front panel.
• How To | Import tracks to Garage Band.
• How To | Insert a KLA181 into Ease Focus
• How To | Send a mono signal to both inputs of a GXD amplifier.
• How To | Set up a GX Series amplifier for sub and tops.
• How To | Connect the eight wall plates with just two jacks on the MP-M Mixer.
• How To | Make DSP settings (presets/scenes etc.) and input gains tamper-proof on the K.2 series of loudspeakers.
• How To | Connect KW181/KSub with K/KW powered loudspeaker.
• How To | Add the new Wideline 8 (WL-3082) voice into a Q-SYS design.
• How To | Replace KS118 Low Frequency Transducer
• How To | Use to the "Line Out" output on a K or KW loudspeaker.
• How To | Use an EXTERNAL CROSSOVER with the K and KW Series Speakers.
• How To | Removing the amplifier module from K, KW, and KLA loudspeakers for repair or replacement
• How To | Playback ALL tracks at once on the TouchMix.
• How To | Copying TouchMix channel settings to different scenes
• How To | Install TWS-IO Temporary Weather Shields
• How To | Recovering TouchMix recording files with Adobe Audition